Metrohm 850 Professional IC AnCat MCS - Manual (Page 94)

4.6 Inline filter
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
84 ￭￭￭￭￭￭￭￭
850 Professional IC – AnCat – MCS
Changing the filter
The flow must be stopped before changing the filter.
1 Removing the inline filter
￭ Unscrew the pressure screws (45-1) from the inline filter.
2 Unscrewing the filter screw
￭ Screw the filter screw (45-4) out of the filter housing (45-2) with
the aid of two 6.2621.000 adjustable wrenches.
3 Inserting the filter
￭ Remove the old filter (45-3) with tweezers.
￭ Place the new filter (45-3) flat in the filter housing with tweezers
(45-2).
4 Mounting filter screw
￭ Screw the filter screw (45-4) back into the filter housing (45-2)
and tighten by hand. Then additionally tighten slightly with two
6.2621.000 adjustable wrenches.
5 Remounting the inline filter
￭ Screw the pressure screws (45-1) back onto the inline filter.
6 Rinsing the inline filter
￭ Dismantle the guard column (if present) and the separation col-
umn and replace with a 6.2744.040 coupling.
￭ Rinse the instrument with eluent.