3 the display, 1 display elements, 2 status display – Metrohm 860 KF Thermoprep User Manual
Page 31: The display, Display elements, Status display, Figure 21, Main dialog
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
860 KF Thermoprep
￭￭￭￭￭￭￭￭
23
[
◀]
Reduces gas flow by 1 mL/min during ongoing opera-
tion. Keep the key pressed down briefly for this purpose.
[
▶]
Increases gas flow by 1 mL/min during ongoing opera-
tion. Keep the key pressed down briefly for this purpose.
[
▲]
Reduces the brightness of the display.
[
▼]
Increases the brightness of the display.
4.3
The display
4.3.1
Display elements
1
2
3
4
5
Figure 21
Main dialog
1
Temperature display
Shows the measured oven temperature.
2
Symbol of the status display
3
Gas flow display
Displays the set gas supply and the flow
rate.
4
Target temperature
Displays the set specification (Temp. 1 or
Temp. 2).
5
Status display
Shows status and error messages.
4.3.2
Status display
Table 1
Symbols of the status display
Symbol
Significance
The oven is being heated.
The oven is being cooled.
The pre-selected temperature was reached.