Metrohm 768 KF Oven User Manual

Page 33

Advertising
background image

3.2 Remote control commands3.2 Remote control commands

768 KF Oven

30

3.2.2.41

Setup.RamInit

$G

Initialises the device as in the diagnostic test, see page 42: All parameters are set to the
default value and error messages are cleared.


3.2.2.42

Setup.InstrNo

$G

Setup.InstrNo.Value

up to 8 ASCII

Device identification outputted in the report. The serial number and manufacturing number
are entered here in the factory as an unequivocal identification.


3.2.2.43

Setup.Save

$G

All entries made via RS232 must be saved with &Setup.Save $G before the instrument is
switched off to avoid losses.

Advertising