Blaupunkt CD52 - Manual (Page 11)

11
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
Switching to radio mode
If you are in CD, CD changer/Compact
Drive MP3 or AUX mode,
➮
press the FM TS button
5
for FM
radio mode.
or
➮
press the AM button
?
for AM ra-
dio mode.
Switching the RDS function on/
off
➮
To use the RDS functions, press
the RDS button
4
.
The RDS function is active when RDS
lights up in the display with a symbol.
Selecting the waveband /
memory bank
This unit can receive programmes
broadcast over the FM and AM wave-
bands. There are three memory banks
(FM1, FM2 and FMT) for the FM wave-
band and two memory banks (AM and
AMT) for the AM waveband.
Six stations can be stored in each mem-
ory bank.
To switch between the FM memory
banks,
➮
briefly press the FM TS button
5
repeatedly until the required mem-
ory bank appears in the display.
To switch between the AM memory
banks,
➮
briefly press the AM button
?
re-
peatedly until the required memory
bank appears in the display.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮
Press the or button
:
.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
➮
Press the or button
:
.
Note:
You can only tune into stations manual-
ly on the FM waveband if the RDS and
PTY functions are deactivated.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮
Press the MENU button
8
.
➮
Keep pressing the button
:
un-
til “SENS” appears in the display.
➮
Press the button
:
.
The display shows the currently set sen-
sitivity level. “SENS 6” means that the
tuner is set to the highest sensitivity
setting. “SENS 1” is the lowest setting.
➮
Set the required sensitivity using
the or button
:
.
RADIO MODE