Blaupunkt CD52 - Manual (Page 16)

16
Random play (MIX)
➮
Press the button 5 MIX
>
.
“MIX CD” appears briefly on the display,
the MIX symbol lights up. The next track
played will be randomly selected.
Stopping MIX
➮
Press the button 5 MIX
>
once
again.
“MIX OFF” appears briefly on the dis-
play, the MIX symbol goes out.
Scanning tracks (SCAN)
You can briefly listen in to all the tracks
on a CD.
➮
Hold down the OK button
;
for
more than two seconds. The next
track starts to play.
Note:
The scanning time is adjustable. Read
about setting the scanning time in the
section “Setting the scanning time” in
the chapter “Radio mode”.
Stopping SCAN and continuing
playback
➮
Press the OK button
;
to end
scanning.
The current track will then continue to
play.
Repeating a track (REPEAT)
➮
If you would like to repeat a track,
press button 4 RPT
>
.
“REPEAT TRCK” appears briefly on the
display, the RPT symbol lights up. The
track is then repeated until RPT is de-
activated.
Stopping REPEAT
➮
If you would like to end repeat,
press the button 4 RPT
>
once
again.
“REPEAT OFF” appears briefly on the
display, the RPT symbol goes out. Nor-
mal playback is resumed.
Interrupting play (PAUSE)
➮
Press the button 1
>
.
“PAUSE” appears on the display.
Ending Pause
➮
Press the button 1
>
during the
pause.
Play then resumes.
Changing the display
➮
To alter the display between track
number and time or track number
and playing time or track number
and CD name, press the DIS
7
button once or several times for
more than two seconds until the
desired elements appear on the
display.
CD MODE