Blaupunkt CD52 - Manual (Page 25)

25
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
Setting the level indicator
The level indicator (spectrometer) on
your display briefly indicates the volume,
tone and equalizer settings with sym-
bols on your display as you make the
corresponding settings.
When settings are not being made, the
spectrometer indicates the original lev-
el of the car radio.
You can also set the type of spectro-
meter on your menu.
There are two types available.
EQUALIZER
Selecting a spectrometer type
➮
Press the MENU button
8
.
“MENU” appears on the display.
➮
Press the button
:
repeatedly
until “EQ DISPLAY” appears on the
display.
➮
Press the or button
:
, to se-
lect between displaying “SPEC-
TRUM 1” and “SPECTRUM 2” or
“EQ DISP OFF”.
➮
Press the MENU button
8
or OK
;
once you have completed the
setting.
Setting aid for the equalizer
Commence settings at mid and treble section and complete them in the bass
section.
Sound impression/problem
Bass reproduction too weak
Impure bass
Booming
Disagreeable pressure
Sound very dominant,
aggressive, no stereo effect
Muffled reproduction
Low transparency
No instrumental brilliance
What to do
Raise bass with
frequency: 50 to 100 Hz,
level: +4 to +6
Reduce lower mid-section with
frequency: 125 to 400 Hz,
level: approx. -4
Reduce mid-section with
frequency: 1,000 to 2,500 Hz,
level: -4 to -6
Raise tweeter range with
frequency: approx. 12,600 Hz,
level: +2 up to +4