Blaupunkt CD52 - Manual (Page 23)

23
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
Setting the volume distribution
front/rear (fader)
➮
To set the volume distribution front/
rear (fader), press the AUDIO
=
button.
“BASS” appears on the display.
➮
Press the button
:
repeatedly
until “FADER” appears on the dis-
play.
➮
Press the or button
:
to set
the volume distribution front/rear.
➮
Press the AUDIO button
=
or OK
;
once you have completed the
setting.
Equalizer
This car radio is fitted with five parametric
digital equalizers, which can be set indi-
vidually. This means you have the means
to save and request different equalizer
settings for different situations (eg only
driver, driver and front passenger or vehi-
cle occupants in front and back).
“Parametric” means that for each of the
five filters, one frequency can be individ-
ually raised or lowered (GAIN +8 to
-8). The following filters are available:
●
SUB LOW EQ 32 - 50 Hz
●
LOW EQ 63 - 250 Hz
●
MID EQ 315 - 1250 Hz
●
MID/HIGH EQ 1600 - 6300 Hz
●
HIGH EQ 8000 - 12500 Hz
These filters can be set without meas-
uring equipment. This means that the
sound quality inside the vehicle can be
greatly influenced.
Presets for different car models (CAR
PRESETS) and musical styles (SND
PRESETS) can also be selected.
Notes on adjusting the equalizer
We recommend you use a CD you are fa-
miliar with when adjusting the equalizer.
Before adjusting the equalizer, set the
tone and volume balance to zero. To do
this, please see the chapter “Tone and
volume balance”.
➮
Listen to the CD.
➮
Evaluate the tone impression ac-
cording to your taste.
➮
Now consult the chart “An aid to
adjusting the equalizer” in the
“Sound impression” section.
TONE AND VOLUME BALANCE EQUALIZER