Blaupunkt CD52 - Manual (Page 13)

13
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
Note:
The set scantime also applies to scan-
ning in CD mode but not to scanning in
CD changer mode.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting. Your radio can receive
and display this information.
For example, the programme types can
be:
ROCK CLS_ROCK TOP_40
ADLT_HIT COUNTRY OLDIES
SOFT_RCK SPORTS TALK
Using the PTY function, you can direct-
ly select stations of a particular pro-
gramme type.
Switching PTY on/off
➮
Press the MENU button
8
.
➮
Keep pressing the or button
:
until “PTY ON” or “PTY OFF”
appears in the display.
➮
Press the or button
:
to
switch PTY ON or OFF.
When PTY is switched on, PTY lights
up in the display.
➮
Press the MENU button
8
or OK
;
.
Selecting a programme type and
starting seek tuning
➮
Press the or button
:
.
The current programme type appears
in the display.
➮
If you want to select another pro-
gramme type, you can do so by
pressing the or button
:
whilst this display is visible.
Or
➮
Press one of the buttons 1 - 6
>
to select a programme type that is
stored on one of these buttons.
The selected programme type is dis-
played briefly.
➮
Press the or button
:
to start
seek tuning.
The next station corresponding to your
selected programme type will then be
tuned into.
Storing a programme type on a
station button
➮
Select a programme type using the
or button
:
.
➮
Keep the required station button
1 - 6
>
pressed for longer than
two seconds.
The programme type is now stored on
the selected button 1 - 6
>
.
Optimising radio reception
Treble reduction feature during
interference (HICUT)
The HICUT function improves reception
during poor radio reception (only FM).
If interference occurs, the treble is au-
tomatically reduced thus reducing the
interference level.
Switching HICUT on/off
➮
Press the MENU button
8
.
RADIO MODE