Barco D-ILA LX-5 - Manual (Page 18)

18
Connection and Installation
Connection During Single-Screen
Mode Display
The single-screen mode displays signals (up to four signals) from a computer as a single video image.
To select to the single-screen mode, set “Display Mode” in the Setting menu to “Single”. (
A Page 33)
Ⅵ Possible Input Signals and Projected Image
NOTE:
● This projector converts the frame rate to 60 Hz regardless of the synchronizing signal frequency at the computer’s end.
● If the resolution of the PC is 2048ן1200 or lower, images are displayed upon doubling the number of the vertical and
horizontal pixels.
Connecting Video
Signals of the Computer
Computer Projector Terminal for
Connection
Output Status
Displayed
Projector Image Resolution Channel Link Status
4096 ן2400
2ch Dual DVI 1, DVI 3 2 Stripes 2048 ן2400
4096 ן2400
4ch Single DVI 1 to DVI 4
Cross 2048 ן1200
4 Stripes 1024 ן2400
4096 ן2160
2ch Dual DVI 1, DVI 3 2 Stripes 2048 ן2160
4096 ן2160
4ch Single DVI 1 to DVI 4
Cross 2040 ן1080
4 Stripes 1024 ן2160
3840 ן2400
2ch Dual DVI 1, DVI 3 2 Stripes 1920 ן2400
3840 ן2400
4ch Single DVI 1 to DVI 4
Cross 1920 ן1200
4 Stripes 960 ן2400
3840 ן2160
2ch Dual DVI 1, DVI 3 2 Stripes 1920 ן2160
3840 ן2160
4ch Single DVI 1 to DVI 4
Cross 1920 ן1080
4 Stripes 960 ן2160
2048 ן1200 1ch Single DVI 1 Normal 2048 ן1200 4096 ן2400
2048 ן1080 1ch Single DVI 1 Normal 2048 ן1080 4096 ן2160
1920 ן1200 1ch Single DVI 1 Normal 1920 ן1200 3840 ן2400
1920 ן1080 1ch Single DVI 1 Normal 1920 ן1080 3840 ן2160
1600 ן1200 1ch Single DVI 1 Normal 1600 ן1200 3200 ן2400
1280 ן1024 1ch Single DVI 1 Normal 1280 ן1024 2560 ן2048
1024 ן768 1ch Single DVI 1 Normal 1024 ן768 2048 ן1536
800 ן600 1ch Single DVI 1 Normal 800 ן600 1600 ן1200
640 ן480 1ch Single DVI 1 Normal 640 ן480 1280 ן960
LX-5_EN.book Page 18 Friday, July 4, 2008 9:35 AM