Barco D-ILA LX-5 - Manual (Page 45)

45
Symptom Probable Cause Corrective Action Reference Page
Image is
unusually dark
or bright ● Is the brightness level properly
adjusted?
● Adjust accordingly using ABrightnessB
of the Image menu.
● Adjust ALamp PowerB in the Option menu.
A Page 32
A Page 36
Coloring of the
image is poor or
distorted ● Is the contrast level properly
adjusted?
● Adjust accordingly using AContrastB of
the Image menu.
A Page 32
● Are the signals of the connected
devices possible input signals?
● Check to ensure that they are possible
input signals, and input compatible
signals accordingly.
A Page 18, 20
● Is the input cable correctly
connected?
● Connect the input cable correctly. A Page 19, 21
Projection
position on the
screen has
shifted ● Has the setup position of the
projector been shifted?
● Check the setup position of the
projector.
^
Image
disappears
suddenly ● Are the video signals correctly
input?
● Check the signals and connection. A Page 18 to 21
Images do not
appear on the
two-screen
mode display ● Are the DVI 1 and DVI 3 terminals
connected for input?
● To display images in the two-screen
mode, connect the DVI 1 and DVI 3
terminals. The left screen displays
images of the DVI 1 terminal, and the
right screen displays images of the
DVI 3 terminal.
A Page 20, 21
Images do not
appear
immediately
after power is
turned on. ● Formatting is in progress. ● Please wait for a few minutes for the
formatting progress to end.
A Page 28
The screen does
not darken
immediately
when the
projection has
ended ● The ending process is in progress. ● Please wait for a few minutes for the
ending process to complete.
A Page 29
LX-5_EN.book Page 45 Friday, July 4, 2008 9:35 AM