Metrohm 806 Exchange Unit - Manual (Page 15)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Construction of the 806 Exchange Unit
806 Exchange Unit
￭￭￭￭￭￭￭￭ 7
9 Mounting ring for the cylinder
(6.2045.XXX)
.000 for 5, 10 mL cylinder
.010 for 20 mL cylinder
.020 for 50 mL cylinder 10 Name plates (6.2244.020)
For labeling the reagent, 10 x
11 Dosing cylinder (6.1518.XXX)
Clear glass
.113 1 mL cylinder
.150 5 mL cylinder
.210 10 mL cylinder
.220 20 mL cylinder
.250 50 mL cylinder
12 Flat stopcock
PCTFE/PTFE 6.1542.020
Ceramic 6.1542.010
13 Plate holder (6.2046.070)
For name plates
14 Switching lever
For switching the flat stopcock
15 Storage vessel (6.1228.000)
For buret tips or electrodes
16 Nominal volume
17 Adsorber tube (6.1619.010)
Adsorber tube 6.1619.010
18 Adapter NS14 for adsorber tube
Of ETFE
19 SGJ clip (6.2023.020)
Of POM
20 Bottle attachment (6.1602.105)
Of PFA/PP, thread GL45
21 Canula (6.1819.020)
Of FEP, thread M6
22 Bottle with thread (6.1608.23)
Amber glass, thread GL45
23 Holding clamps (6.2043.005)
For reagent bottles
24 Storage vessel (6.1228.000)
For buret tips or electrodes
25 PTFE piston (6.1556.XXX)
with coupling
.110 for 1 mL cylinder
.150 for 5 mL cylinder
.210 for 10 mL cylinder
.220 for 20 mL cylinder
.250 for 50 mL cylinder
26 Antidiffusion tip (6.1543.200)
Of ETFE/FEP, for titrations