Metrohm Inline Dialysis - Manual (Page 16)

3.2 Connecting the dialysis cell
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭
IC equipment: Dialysis
3.2 Connecting the dialysis cell
This chapter describes how to establish the capillary connections of the
dialysis system. It does not, however, describe the tubing configuration for
the peristaltic pump. Please refer to the chapter "Installing the peristaltic
pump" in the manual for the Sample Processor or the ion chromatograph
for this information.
Connections for acceptor solution
Required accessories ￭ Dialysis cell (6.2729.100)
￭ PTFE capillary, 0.5 mm ID / 1 m (6.1803.040)
￭ Pump tubing LFL (orange/yellow), 3 stoppers (6.1826.320)
￭ Pump tubing LFL (black/black), 3 stoppers (6.1826.340)
￭ PEEK capillary, 0.5 mm ID / 40 cm (6.1831.050)
￭ PEEK capillary, 0.5 mm ID / 70 cm (6.1831.160)
￭ Pressure screw PVDF (6.2744.000)
￭ Coupling olive/UNF 10/32 (6.2744.030)
￭ Pressure screw, short (6.2744.070)
￭ Pump tubing connection with locking nut (6.2744.160)
We recommend using the peristaltic pump in the ion chromatograph for
conveying the acceptor solution.