Metrohm 859 Titrotherm - Manual (Page 24)

3.5 Connecting a sensor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭ 859 Titrotherm
6.2151.000
Figure 11 Connecting USB devices to the 859 Titrotherm
This way, several Metrohm devices can be connected with one another
and be controlled simultaneously from one PC software.
3.5 Connecting a sensor
Connect the Thermoprobe as follows:
1 Plug the Thermoprobe plug into the T-Port 1 or T-Port 2 socket of
the 859 Titrotherm.
Note the orientation of the plug.
Connecting a Thermoprobe
In order to disconnect the sensor, the outer plug sleeve on the plug must
first be retracted.
Note
Never use the cable to pull out the sensor!