Blue Rhino FC-0007 - Manual (Page 10)

SAFETY
SE6 05/05 Safety Section 1-4
© 2005 Alamo Group Inc.
SAFETY
Always read carefully and comply fully with the manufacturers instructions when
handling oil, solvents, cleansers, and any other chemical agent.
(SG-22)
KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement and
possible serious injury or death.
(SG-24)
Never allow children to play on or around Tractor or Implement. Children can slip or fall off the
Equipment and be injured or killed. Children can cause the Implement to shift or fall crushing
themselves or others.
(SG-25)
NEVER use drugs or alcohol immediately before or while operating the Tractor
and Implement. Drugs and alcohol will affect an operator’s alertness and
coordination and therefore affect the operator’s ability to operate the equipment
safely. Before operating the Tractor or Implement, an operator on prescription
or over-the-counter medication must consult a medical professional regarding
any side effects of the medication that would hinder their ability to operate the
Equipment safely. NEVER knowingly allow anyone to operate this equipment
when their alertness or coordination is impaired.
Serious injury or death to the
operator or others could result if the operator is under the influence of drugs or
alcohol.
(SG-27)
Prolonged operation may cause operator boredom and fatigue affecting safe operation. Take
scheduled work breaks to help prevent these potentially impaired operating conditions. Never
operate the Implement and Tractor in a fatigued or bored mental state which impairs proper and
safe operation.
(SG-32)
Use extreme caution when getting onto the Implement to perform repairs, maintenance and when
removing accumulated material. Only stand on solid flat surfaces to ensure good footing. Use a
ladder or raised stand to access high spots which cannot be reached from gound level. Slipping
and falling can cause serious injury or death.
(SG-33)
Avoid contact with hot surfaces including hydraulic oil tanks, pumps, motors, valves and hose
connections. Relieve hydraulic pressure before performing maintenance or repairs. Use gloves
and eye protection when servicing hot components. Contact with a hot surface or fluid can cause
serious injury from burns or scalding.
(SG-34)