6 shutting down the implement, Shutting down the implement -33, Operation – Blue Rhino FC-0007 User Manual

Page 125: Opera t ion

Advertising
background image

OPERATION

SE6 05/05

Operation Section 4-33

© 2005 Alamo Group Inc.

OPERA

T

ION

Do not mow, or drive the tractor into, material that is burning, or areas that recently burnt and may contain hot
spots. Burning material, sparks, and coals could be thrown from the mower to areas of vegetation that might
ignite. Tire damage can occur when driving over hot material. Oil and grease on the tractor and mower could
ignite resulting in equipment destruction. Carry a fire extinguisher on the tractor at all times to extinguish
possible fires encountered

.

10.6 Shutting Down the Implement

To shut down the implement, first bring the tractor
to a complete stop. Then slow down the implement
by reducing the engine speed before disengaging
the PTO. Wait for all motion to stop before
proceeding to drive or shut down the tractor.

Park the tractor on a level surface, place the
transmission in park or neutral and apply the
parking brake, lower the attached implement to the
ground, shut down the engine, remove the key, and
wait for all motion to come to a complete stop
before exiting the tractor. OPS-U- 0016

Advertising