Blue Rhino FC-0007 - Manual (Page 112)

OPERATION
SE6 05/05 Operation Section 4-20
© 2005 Alamo Group Inc.
OPERA
T
ION
All Safety Shields, Guards and Safety devices including (but not limited to)
- the Deflectors, Chain Guards, Steel Guards, Gearbox Shields, PTO
integral shields, and Retractable Door Shields should be used and
maintained in good working condition. All safety devices should be
inspected carefully at least daily for missing or broken components.
Missing, broken, or worn items must be replaced at once to reduce the
possibility of injury or death from thrown objects, entanglement, or blade
contact.
(SGM-3)
• Lift Type-Ensure the tailwheel beam position
support bolts are properly installed and
tightened.
• Pull Type-Ensure that the tailwheel ratchet or
hydraulic cylinder is installed and retained
correctly to provide the desired cutting height.
• Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0039_C
• Ensure the tractor PTO master shield and the
mower slip clutch shield are in place, lowered,
and in good condition.
• Ensure the driveline integral shield is in good
condition and rotates freely.
• Ensure the driveline slip clutch is properly
adjusted. OPS-R-0039