HF scientific MicroTOL Online Turbidimeter old series- 0-1000 NTU - Manual (Page 9)

MICRO TOL (12/04)
Rev. 2.7 3
Figure 1 – Display used in the instrument.
All items used on the display are shown in this figure
1.3 The Touch Pad
Figure 2: The Micro TOL touch pad.
Figure 2 illustrates the touch pad. The touch pad has four buttons: MODE/EXIT,
↵, t,
and
u. The MODE/EXIT button is used to cycle between the four operational modes of
the instrument: CAL, CAL OFFSET, CONFIG, and AUTO (Measurement) mode. The
↵ button enters the option (or mode that is highlighted or chosen. The tand u buttons
are used to scroll through lists and to increase or decrease settings.