JK Audio BlueSet - Manual (Page 10)

6
BlueSet Wireless Headset Interface
Bluetooth Wireless Technology
Pairing to a Headset
with Bluetooth Wireless
Technology
When you're first connecting to a
new device, you should be in an
environment with no other Bluetooth
wireless technology enabled devices
within range that might also be in
Pairing Mode.
1. Set the <Headset / Phone Switch>
to the <Headset> position.
2. Following manufacturer’s
instructions, set your headset to
Pairing Mode.
3. From the powered-off state, hold
the <Connect Button> on the
BlueSet for at least 6 seconds. After
you release it, the blue LED should
flash rapidly if the BlueSet is in
Pairing Mode.
4. When bonding is complete, the blue
LED will flash at a rate of 2 seconds
off, 1 second on (2 secs off, 4 secs
on for HD Voice). Subsequent
connections can be made more
quickly from Idle Mode by holding
the <Connect Button> for only 2
seconds before releasing.
Note: Connecting via Bluetooth
wireless technology varies with different
cell phones.
Note: If left unused in Idle or Pairing
Mode, the BlueSet will automatically
disconnect the Bluetooth connection in
two minutes and power off.