JK Audio BlueSet - Manual (Page 5)

1
Overview
Introducing the BlueSet.
These headset interfaces plug directly into most Party- Line (PL) belt packs,
replacing the wired headset. A 3.5 mm stereo headset jack contains a mic level
output signal suitable for recording, with the beltpack headphone signal on
the left channel, and the Bluetooth return signal on the right. A switch selects
between connection to a 3rd party Bluetooth headset or a cell phone.
Headset Connect: Leave your belt pack on the desk as you walk around the
room. Some Bluetooth headsets allow you to switch between two phones, or in
this case, switch between your intercom and your cell phone.
Phone Connect: Pair BlueSet to your cell phone to grant remote access to the
Party-Line for a distant member. The belt pack Mic/Talk button controls audio
from the cell phone into the intercom system.
Headset Compatibility: Female and Male XLR four and five pin versions
available: BlueSet-F4, BlueSet-F5, BlueSet-M4, BlueSet-M5.
Overview