JK Audio BlueSet - Manual (Page 8)

4
Pairing Mode
In Pairing Mode, any Bluetooth
wireless technlogy enabled device
within range can pair with your
BlueSet. To put the unit in Pairing
Mode, press the <Connect Button>
for 6 seconds. The blue LED will
flash rapidly at a rate of 100ms
off, 100ms on. Once the pairing
process is complete the unique
device ID is stored in Connection
History. Subsequent connections
can be made automatically from
Idle Mode.
Idle Mode
To connect from Idle Mode, hold
the <Connect Button> for 2
seconds. Upon release, the blue
LED will flash at a slow rate of
2 secs off, 200ms on. In Idle
Mode, BlueSet searches for paired
devices.
Connected Mode
After bonding is complete, the blue
LED will flash at a slower rate of
2 secs off, 1 sec on (2 secs off,
4 secs on for HD Voice). The
connection to that device
is secure.
Bluetooth Status LED
The blue LED on the side of the unit flashes in different sequences to indicate the
current connection status.
Note: If you put the unit into the wrong state due to releasing the <Connect Button> at the
wrong time, please start over from the powered-off state.
Bluetooth Wireless Technology