JK Audio BlueSet - Manual (Page 11)

7
When Should I Release the MFB Button?
Idle Mode Pairing Mode Role Change Clear
Bluetooth LED
seconds
Bluetooth Wireless Technology
least 20 seconds. After resetting, the
BlueSet will return to Pairing Mode.
Reconnecting to
Paired Devices
To reconnect to a device that is in
Connection History, the BlueSet
should be in Idle Mode (pg. 4) and
will automatically connect to a paired
device that is within range.
When reconnecting to your cell
phone, the BlueSet should be set to
<Phone>. For Bluetooth headsets, the
BlueSet should be set to <Headset>.
Disconnecting from a Device
To disconnect from any Bluetooth
wireless technology enabled device
and turn the power off, simply hold the
<Connect Button> until the blue LED
turns off (approx. 5 seconds).
Connection History
BlueSet rretains a history of the
16 most recent devices. To clear
connection history and return to
factory default, with the BlueSet
powered off, set the switch to the
<Headset> or <Phone> position, then
hold the <Connect Button> in for at
Bluetooth Wireless Technology