JK Audio RemoteMix 2 - Manual (Page 10)

RemoteMix 2™ Broadcast Field Mixer
6
Setting Up
1. Connect your audio equipment, microphones, cue input, and headphones to
the input and output jacks on RemoteMix 2.
2. There are 2 ways to connect the RemoteMix 2 to the phone line:
A. For Analog Phones: Connect the jack marked <Phone Line> to any
standard analog telephone line, or
B. If there is no Land Line: Connect the <Headset Interface> jack to the
headset jack on your cellular telephone using the supplied JK Audio
interface cable.
The 1/4” Headset Interface jack also serves as a Cue Input that feeds
the headphones. This signal does not reach the XLR output but will be
present on the right channel (return) of the stereo output.
Getting Connected