JK Audio RemoteMix 2 - Manual (Page 9)

Inputs & Outputs
Phone Line Connection
7.
Phone Line
The RemoteMix 2 has an RJ-11 jack that can be connected to any
standard, single line analog telephone line. This jack should not be
connected directly to digital PBX or ISDN phone systems.
8.
Wireless / Cellular Telephones
RemoteMix 2 comes equipped with a <Headset Interface> built in to
the 1/4” <Cue Input>. This 1/4” headset interface accepts a specially
designed 1/4” to 2.5 mm or 1/4” to 3.5 mm cable provided with the unit.
This interface works with any wireless phone or notebook that accepts
standard third party headsets and earpieces. Some wireless phones have
the standard 2.5 mm TRS jack while others have a 3.5 mm TRRS jack
and others yet have proprietary jacks. Adaptors to convert the proprietary
jack to a standard 3-conductor 2.5 mm or 4-conductor 3.5 mm jack
are available for most wireless telephones through their dealers, local
electronic stores or many internet stores.
9. When using the wireless interface, it is important to keep your wireless
telephone 12” - 24” away from the RemoteMix 2 and any microphone
or headphone cables. This will help prevent unwanted RF noise from
entering the unit.
5
Getting to Know Your RemoteMix 2