JK Audio RemoteMix 2 - Manual (Page 6)

2
RemoteMix 2™ Broadcast Field Mixer
Getting to Know Your RemoteMix 2
4 8 7
3 5 6 1
2
1.
Mic Level Controls
Each XLR input has a level control knob.
2.
Headphone Controls
Each headphone outputs has a separate level control so each listener can
adjust their audio level independently.
3.
Aux In Control
Adjust the level of audio coming in through the 3.5 mm <Aux Line In> jack.
4.
Cue Control
The <Cue> input control adjusts the signal going to the headphones from
the 1/4” <Cue Input>. When using the 1/4” Cue Input Wireless Interface,
the individual headphone level control adjusts the overall level of your
headphones while the <Cue> input control adjusts the level of the person
on the other side of the call in both headphones. You should keep in mind
that your wireless telephone also has level control. If you are having level
problems that cannot be corrected with the controls on the RemoteMix 2, try
adjusting the level on the wireless telephone itself.
5.
Keypad
The telephone keypad provides DTMF tone dialing. You may use the
keypad at anytime during a call but keep in mind that both transmit and
receive telephone audio are muted during a keypress.
Controls & Indicators