Getting to know your remotemix 2 – JK Audio RemoteMix 2 User Manual
Page 8
RemoteMix 2™
Broadcast Field Mixer
4
Getting to Know Your RemoteMix 2
6
7
8
1
2
4
3
5
Inputs & Outputs
1.
Mic Input 1
Balanced XLR jack with low-noise pre-amplifiers.
2.
Mic Input 2
Balanced XLR jacks with low-noise pre-amplifiers. A <Mic/Line> selector
switch adds a 40 dB pad for a line level balanced input.
3.
3.5 mm Line Level Input
You can connect either a mono or stereo signal to this mini jack. If you use a
stereo input, both channels will immediately be summed together.
4.
Stereo 3.5mm Line Level Output
Can be connected to your mini disk or other recording device. The <Master
Output> will be on the Left channel and the Receive mix from the phone
line and/or Cue input on the Right channel.
5.
Master Output
A balanced XLR jack that contains the sum of all both XLRs and the 3.5 mm
input. This audio signal has a full 20 Hz to 20 kHz bandwidth.
6.
Headphone Jacks
Headphone output is a mix of local mic and line inputs including the return
from the phone line.