Reloop SPIN!2 - Manual (Page 51)

ENGLISH
51
- The device must not be operated after being taken from a cold environment into a warm
environment. The condensation caused hereby may destroy your device. Do not switch on or
operate the device until it has reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This
device should only be cleaned with a damp cloth. Never use solvents or cleaning fluids with a
petroleum base for cleaning.
- When relocating, the device should be transported in its original packaging.
- When starting operation, the crossfaders and volume controls of your amplifier must be set to
minimum level. Bring the loudspeaker switches into the “OFF” position. Wait between 8 to 10
seconds before increasing the volume to avoid shot noise created by transient effect, which could
cause damage to loudspeakers and the diplexer.
- Devices supplied by voltage should not be left in the hands of children. Please exercise particular
care when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the
organization of professional associations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device must be
monitored with responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or
problems.
APPLICATION IN ACCORDANCE WITH REGULATIONS
- This device is a professional digital timecode system that can control software via the included
timecode vinyl records and CDs respectively. The device should be connected via USB cable to a
computer.
- If the device is used for any other purposes than those described in the operation manual,
damage can be caused to the product, leading to exclusion of warranty rights. Moreover, any
other application that does not comply with the specified purpose harbours risks such as short
circuit, fire, electrical shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the warranty
rights.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the mains line or the casing, as
well as for wearout of wear parts such as rotary and sliding switches.
- If it is to be assumed that a safe operation is no longer feasible then the device must be
disconnected and secured against accidental use. Always disconnect the mains plug from the
outlet!
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects,
if the device no longer functions, following longer storage under unfavourable conditions or after
major transport stress. This manual, video tutorials, tips and tricks and additional downloads can
be found on:
www.reloop-spin.com