Reloop SPIN!2 - Manual (Page 66)

ENGLISH
66
32. Vinyl Timecode Activation
Via this button you can activate the Timecode Mode, which means that an operation via timecode
records and CDs becomes possible. If this button is deactivated it is only possible to control the
software via the mouse.
33. Spin! Mode Button
By using this button you can choose between the playback modes Spin! Mode, Classic Spin!,
Advanced Spin! and Battle Spin!.
a) Classic Spin!
The audio files will be played from beginning to end, just like a normal record (needle drop).
Classic mixing and scratching are possible but without the loop, cue points and effects options.
b) Advanced Spin!
In this mode needle drop is also possible. But it is commensurate to the vinyl record‘s length. So
if you would like to jump to the middle of a song, you have to place the needle in the middle of the
record. Classic mixing and scratching are possible; loops, cue points and effects are available.
c) Battle Spin!
No needle drop is available here. This means that the track will always continue no matter where
the needle is placed on the record. This mode is appropriate for scratching even if the needle should
skip. Battle mixing is possible; loops, cue points and effects are available.
34. Play/Pause Button
By pushing this button you will start the previously selected track. This function is only available in
PC controll mode.
35. Cue Button
By using this button you will change to Cue Mode. There are two possibilities in order to set a cue
point.
a) Cue Pause
In playback mode push the Play/Pause Button -34- in order to change to pause mode. Now push
the cue button in order to set a cue point.
b) Loop In
During playback or in pause mode you can push the Loop In button in order to set a cue point.