Reloop SPIN!2 - Manual (Page 71)

ENGLISH
71
48. Crossfader
The Crossfader is solely intended for the PC control mode. When in regular Timecode Mode (external
mixer) you will not need the crossfader. Via the fader you can crossfade from channel 1 to 2 and vice
versa.
NOTE!
When in Timecode Mode the crossfader should be in the middle position.
49. Beat Match Function
The Beat Match Function is a handy helping tool in order to match the pitch of two different tracks
with the push of a button. You can either match the right player with the left player or you can match
the left player with the right player.
50. Cue Points
It is possible to set up to 6 cue points per track. They will be permanently saved automatically until
they are replaced by new ones.
• In order to set a cue point via mouse push the right mouse button at the desired time.
• In order to call up a cue point a click of the left mouse button suffices.
• If a cue point has been saved you will see a thick green mark on the corresponding cue button.
• Set the cue point for player 1 via the numbers 1 – 5 (only 5 cue points per player) and for player
two via the numbers 6 – 0.
• If you push the according number again the cue point will be called up (hot cue).
Beatmatch Hotkey
Player 1 Y
Player 2 X