Teradek Bond User Manual
Page 12
Version 2.0 Jun
‟12 © Teradek, LLC 2012. All rights reserved.
Page | 12
Custom configuration typically requires carrier and device specific settings for the device Mode, APN, and
often a Login and Password. These settings can often be found online or through the cellular service
provider. An up-to-date list of currently supported modems is located in the Frequently Asked Questions
section of
.
Status LEDs
Bond‟s front plate contains 6 status LEDS – 5 for the USB modems, and one for the USB Host interface
between Cube and Bond.
These LEDs correspond to each of the USB ports on Bond as shown below.
The LED operation works as follows:
Host LED
Off: No Power
Solid Orange: Booting
Blinking Orange: Upgrading
Solid Red: No connection to Cube
Solid Green: Ready and connected to Cube
USB LED
Off: No Modem
Solid Orange: Connecting to Internet
Solid Green: Connected to Internet
Solid Red: Disconnected from Sputnik server