Teradek Bond - Manual (Page 5)

Version 2.0 Jun ‟12 © Teradek, LLC 2012. All rights reserved.
Page | 5
1.2. Sputnik Host Address: The destination IP address or hostname of your Sputnik server.
1.3. Sputnik Listening Port: The TCP port that Sputnik is accepting connections on. Default value is
5111, and this setting must match the port configured at the Sputnik Server.
1.4. Adaptive Internet Streaming Settings:
1.4.1. Max Buffer Length (default 4000 milliseconds) – This value controls the maximum length of
Sputnik‟s buffer. Smaller values will result in lower end-to-end latency at the expense of
video stability.
1.4.2. AI Streaming – Setting the AI Streaming to „Enabled‟ allows the stream bitrate to
dynamically adjust with varying network conditions.
1.4.3. Max Bitrate – The maximum bitrate allowed when AI Bitrate is enabled. This value can be
matched to your destination‟s downstream bandwidth or set to limit the bitrate in less-than-
ideal coverage areas.
2. Configure your Stream Application
2.1. Use these settings to configure the video stream from Sputnik to your destination.
2.2. Livestream (Live Internet Streaming) – Cube and Bond offer native integration with Livestream
for live event broadcasts and turnkey remote content distribution. Depending on your needs,
Livestream offers multiple free or paid membership options. A Livestream account is required to
use this feature.
2.2.1. Enter your Livestream username, password, and channel short name. Click „Verify Login‟ to
check that Cube can contact Livestream and that your login information is valid. NOTE: the
channel short name is case sensitive.
2.2.2. Check any options you would like to apply to your channel.