Teradek Bond User Manual

Page 7

Advertising
background image

Version 2.0 Jun

‟12 © Teradek, LLC 2012. All rights reserved.

Page | 7

2.3. RTMP streaming allows you to stream to your own custom server or CDN. Configuration for

RTMP requires a destination server URL and a stream name, and allows Cube to push video

content directly to the destination.

2.3.1. Configuration:

2.3.1.1.

Enter the server URL. Depending on where you are streaming to (local server or

CDN), this will look something like rtmp://server.address:1935/live. This will vary by

platform, so check with them to get the proper address. Often the server URL is found

with FMLE instructions or contained in a downloadable XML file.

2.3.1.2.

Enter the stream name. This varies by platform, but should be found somewhere

near the server URL.

2.3.1.3.

Select enabled or disabled for auto-start broadcast. If enabled, Cube will attempt

to start a broadcast whenever it starts up.

2.3.1.4.

Click „Apply.‟ You can start/stop the stream by clicking the buttons on the Stream

Settings page or by holding the 'Go Live!' button on Cube for ~1 second.

2.3.2. User Agent/Authentication. If your service provider requires User name/Password

authentication, enter your credentials in t

he „RTMP Authentication‟ field. In most cases, the

„User Agent‟ field must be set to „FMLE/3.0‟ if using authentication.

2.4. MPEG Transport Stream

– Transport Stream is useful for video backhaul applications. In this

mode, Cube and Bond stream to Sputnik, and Sputnik sends video to a specified unicast or

multicast address. In addition, Sputnik can act as a server and listen for connection requests to

the stream. The MPEG transport stream protocol is used in many broadcast applications and is

also supported by many IPTV set top boxes. The transport stream license can be purchased

online at

http://store.teradek.com

and is required to use this feature.

2.4.1.

Configuration: To enable transport stream, select „MPEG Transport Stream‟ for the stream

Mode. Sputnik can act as a transport stream server and listen for connection requests, or it

can push to a specified destination.

Advertising