Trebor 50R-X12 Maxim - Manual (Page 21)

MAXIM 50R PUMP OPERATION / MAINTENANCE MANUAL PAGE 21

Reinstall transfer tubes in head ports using latex gloves for added grip.
Ensure transfer tubes are tight.
 Thread pilot seat into head using 3/4” pilot centering pin tool.

Install pilot poppet into pilot seat.
 Position pilot cap seal into bore and thread in pilot cap using 3/4” pin tool.

Position control base on mounting base, slide base forward, use locking lever
to secure.

Loosely attach quick grip nuts to transfer tube ports on control base.

Install pump onto control base by inserting transfer tubes in pump into quick
grip nuts on control base.

To secure pump to control base, tighten quick grip nuts one (1) full turn past
hand tight using 13/16” wrench.

Reconnect both air supply and fluid lines.