Trebor IQ Chemical Heater - Manual (Page 5)

MODEL IQ CHEMICAL HEATER OPERATION / MAINTENANCE MANUAL PAGE 5
2
SAFETY
2.1 SAFETY PRECAUTIONS
This section provides important information for safe operation of the IQ chemical
heater.
The equipment described in this manual uses hazardous voltage electricity that
can be dangerous. Local policies and procedures for safely operating any Trebor
chemical heater(s) supersede the safety considerations listed below. It is the
responsibility of all personnel to follow such policies and procedures. All safety
guard devices must be in place when equipment is in operation. Operators, set-
up operators, helpers or installation personnel should not alter, remove or disable
safety devices or equipment.
2.1.a General Safety

There are no serviceable parts inside the heater assembly; never open or
disassemble. Attempting to do so will void the product warranty.

Do not attempt to work on or with hazardous chemicals or electrical
equipment without proper safety training and certification, understand first aid
for electrical shock and hazardous chemicals spills.

Lockout and tag the electrical and chemical systems prior to installation or
replacement. Refer to company safety policies and procedures prior to
installation or replacement.

Always disengage the heater and optional equipment from electrical sources
prior to installation or replacement.

Always refer to company safety policies and procedures for flushing and
decontamination prior to removal.
2.2 SAFETY MESSAGE CONVENTIONS
2.2.a Caution
A Caution message indicates a potentially
hazardous situation, which, if not avoided,
could result in minor or moderate injury. It
may also be used to alert against unsafe
practices. A typical Caution message: Caution
Corrosive Chemical
Product may contain
hazardous corrosive
liquids.
Handle with care.