Winchester Repeating Arms 9410 Top Tang Safety (Historic Manual) - Manual (Page 26)

3. WHEN THROUGH FIRING ALWAYS
IMMEDIATELY PLACE THE TOP-TANG SAFETY
IN THE “ON” POSITION (FIGURE 19), AND THE
HAMMER IN THE SAFETY (REBOUND)
POSITION (FIGURE 6).
To fire additional shells from the magazine, simply
work the finger lever downward fully and return it to
the original upward position and repeat the firing
sequence again.
WHEN FIRING IS COMPLETED OR WHEN
SHOOTING IS NO LONGER IMMINENT,
IMMEDIATELY RETURN THE MANUAL
HAMMER STOP/SAFETY TO THE “ON”
(SAFE) POSITION AND RETURN THE
HAMMER TO THE REBOUND POSITION.
IMPORTANT: UNDER NO CIRCUMSTANCES
SHOULD YOU MOVE ON OR CONTINUE TO
HUNT WITH YOUR HAMMER OR SAFETY IN
THE FIRE POSITION.
ALWAYS UNLOAD YOUR MODEL 9410
COMPLETELY. INSPECT THE CHAMBER,
MAGAZINE AND FEED MECHANISM TO MAKE
SURE THEY DO NOT CONTAIN ANY SHELLS.
S IGHT A DJUSTMENTS
All Model 9410 shotguns are fitted with open sights.
The style and adjustment system may vary between
models and grades.
The proper procedure is to shoot a group or pattern with
26
Move the elevator
forward to shoot lower, rearward
to shoot higher
Lift up on the blade holder
Sight elevator
FIGURE 20
Push the hammer
stop/safety from front
to back to the “on safe”
position
FIGURE 19
02-224-WFA_9410_OM_revis 7/16/03 2:52 PM Page 26