Winchester Repeating Arms 9410 Top Tang Safety (Historic Manual) - Manual (Page 38)

38
This is a specialized, finely fitted mechanism. You may
permanently mar it by attempting to disassemble the
inner mechanism assemblies. If further disassembly for
service or cleaning is required, take your gun to a U. S.
Repeating Arms Company Authorized Repair Center or a
competent gunsmith as explained under “Service or Repair.”
P ARTS , S ERVICE , R EPAIR AND Q UESTIONS
If your Winchester firearm should ever need service or
repair, it is often best to utilize one of our Authorized
Service Centers for Winchester firearms. In some cases it
is appropriate to use the Winchester Service Center in
Arnold, Missouri. A list of Authorized Service Centers is
included with your new firearm. If you need a new listing,
please contact us. We can help you determine the best
place to send your firearm for service.
In order to avoid delays, it is important to never send your
gun directly to our facility without direct authorization
from one of our service specialists. This avoids possible
delays in obtaining service. Contact us for details on how
to receive service prior to sending your gun.
Parts listings, Authorized Service Center lists, service
procedures and general product information can also be
found on the web at www.winchesterguns.com.
G ENERAL P RODUCT
AND H ISTORICAL Q UESTIONS
Winchester Rifles and Shotguns Customer Service
275 Winchester Avenue
Morgan, UT 94050-9333
1-800-945-5237
P ARTS , S ERVICE , R EPAIR S TATUS
AND T ECHNICAL Q UESTIONS
Winchester Rifles and Shotguns Parts & Service
3005 Arnold Tenbrook Road
Arnold, MO 83010-9406
1-800-322-4626
CAUTION: PARTS ARE MADE FOR
WINCHESTER BRAND GUNS
MANUFACTURED BY OR FOR U.S.
REPEATING ARMS COMPANY, INC.,
AND SHOULD NOT BE USED IN OTHER
GUNS EVEN THOUGH MODELS MAY BE
SIMILAR. IMPROPERLY FITTED PARTS
MAY BE DANGEROUS.
02-224-WFA_9410_OM_revis 7/16/03 2:52 PM Page 38