Winchester Repeating Arms 9410 Top Tang Safety (Historic Manual) - Manual (Page 29)

S TANDARD I NVECTOR ™
T HREADED C HOKE T UBE S YSTEM
Some Model 9410s are fitted with the interchangeable
Standard Invector™ choke tube system. If your shotgun
has the words “Standard Invector” inscribed on the side
of the barrel, then you have the system.
The Standard Invector system allows you to configure
your Model 9410 for the pattern and/or choke
constriction your hunt demands. It also offers versatility
when using slugs or sabots and allows the use of an
accessory rifled choke tube for use with sabot-type slugs.
The Standard Invector screw-in choke tube system gives
you excellent patterns for target and field situations. Plus,
it is extremely easy to switch choke constrictions to
match your shooting conditions. Standard Invector
tubes are fully steel, lead, bismuth and tungsten shot
compatible. A special choke tube wrench is provided
to remove and tighten these tubes.
CAUTION: DO NOT USE STANDARD
INVECTOR TUBES IN ANY SHOTGUN
BARRELS NOT SUPPLIED BY U. S.
REPEATING ARMS COMPANY (THE MAKERS
OF WINCHESTER BRAND FIREARMS). ALSO,
DO NOT USE ANY OTHER CHOKING DEVICE
IN ANY SHOTGUN BARRELS SUPPLIED BY
U. S. REPEATING ARMS. USE ONLY THE
APPROPRIATE GAUGE AND TYPE OF CHOKE
TUBES MARKED STANDARD INVECTOR IN
YOUR MODEL 9410 SHOTGUN.
CAUTION: WHENEVER HANDLING ANY
SHOTGUN FOR THE PURPOSE OF REMOVING
OR INSTALLING A CHOKING DEVICE, MAKE
ABSOLUTELY CERTAIN THE GUN IS FULLY
UNLOADED, THE HAMMER IS IN THE
REBOUND POSITION, THE MANUAL HAMMER
STOP/SAFETY IS IN THE “ON” POSITION AND
THE ACTION IS LOCKED OPEN! MAKE SURE
THE MUZZLE IS POINTED IN A SAFE
DIRECTION. NEVER ATTEMPT TO REMOVE
OR INSTALL A SHOTGUN CHOKING DEVICE
ON A LOADED FIREARM!
DO NOT FIRE THIS SHOTGUN WITHOUT
HAVING THE STANDARD INVECTOR™ CHOKE
TUBE INSTALLED. PERMANENT DAMAGE
MAY RESULT TO THE THREADS.
FAILURE TO FOLLOW THESE WARNINGS MAY
CAUSE DAMAGE TO YOUR GUN AND CAUSE
INJURY TO YOURSELF AND OTHERS.
T UBE REMOVAL —
1. Place the manual hammer stop/safety in the “on”
position and fully unload your Model 9410.
2. Open the action.
29
02-224-WFA_9410_OM_revis 7/16/03 2:52 PM Page 29