Winchester Repeating Arms 9410 Top Tang Safety (Historic Manual) - Manual (Page 32)

32
The hammer extension can be used in either the right
hand or left hand position. To install, coat the hammer
extension threads with Loctite
® thread locking compound.
Position the round hollow edge to the left or right as
preferred and fully tighten the hammer extension in the
tapped hole in the hammer (Figure 26). (Right-handed
shooters usually prefer mounting the extension to the
right side.)
WARNING: HAMMER EXTENSIONS CAN
LOOSEN WITH USE. OCCASIONALLY CHECK
TO MAKE SURE YOUR HAMMER EXTENSION
IS STILL ON TIGHTLY. PROPER MOUNTING
OF THE HAMMER EXTENSION IS IMPORTANT
TO PREVENT ACCIDENTAL DISCHARGE.
It is important to familiarize yourself thoroughly with the
operation and use of the hammer extension and your
firearm prior to using live ammunition.
Three shot adapter
inside magazine
FIGURE 28
Insert the
threaded end into
the threaded hole
and tighten
FIGURE 26
Remove magazine
end cap
FIGURE 27
02-224-WFA_9410_OM_revis 7/16/03 2:52 PM Page 32