Clarion NP401 - Manual (Page 16)

E
ng
lis
h
O
w
ne
r’s
M
an
ua
l
16 NP401
Action Button(s) Description
Viewing modes
, ,
Gives you the following map perspectives in Clarion Mobile Map:
• classic top-down view (2D), the top of the map always faces North
• top-down view (2D), the top of the map always points in the current
driving direction
• perspective view (3D), the top of the map always points in the
current driving direction
The icon always shows the mode the button switches to: If you are in
3D mode, you can see the
button and you need to tap it to switch
to 2D mode.
Smart Zoom
Clarion Mobile Map can automatically rotate, scale and tilt the map
and give you the optimal view:
• When you are approaching a turn, Clarion Mobile Map zooms in and
raises the view angle to let you easily recognize your maneuver at
the next junction.
• If the next turn is at a distance, Clarion Mobile Map zooms out and
lowers the view angle to show you the road in front of you.
Tap this button once to enable Smart Zoom.
Tap&hold the button to set the zoom limits of Smart Zoom.
Returning
to normal
navigation
(back to the
GPS position
with automatic
map rotation)
Tap this button to move the map back to the current GPS position. If
the map has been rotated, automatic map rotation is also re-enabled.
Zoom preset
buttons
(available in
Advanced
mode only)
Tap one of the preset buttons to set the zoom level to a fix, predefined
value. Smart Zoom is disabled. These buttons are available in 2D mode.
Tap&hold any of the buttons to set its value to the current zoom level,
or to reset it to its original value.
NP401 OM_100920_EN.indd 16 2011-1-6 16:10:52