Clarion NP401 - Manual (Page 55)

E
ng
lis
h
O
w
ne
r’s
M
an
ua
l
NP401 55
Most of the fields on this screen have a symbol
next to them. This symbol shows whether the field
it is attached to is shown on the map as a Trip Data.
It also shows the position of the data as follows:
Symbol Description
This value is not shown on the map
screen.
This value appears on the map
screen in the Trip Data area. This is
the value at the top.
This value appears on the map
screen in the Trip Data area. This is
the value in the middle.
This value appears on the map
screen in the Trip Data area. This is
the value at the bottom.
6.1.7.1 Trip Computer screen
The Trip Computer screen provides collected trip
data. It can be opened from the Trip Information
screen by tapping
.
The fields on this screen are continuously updated
while you keep the screen open.
You can switch between the trips, pause then
resume them, or reset their data.
You have the following functions on this screen:
Button Description
, Cycles through all trips.
Pauses the trip currently shown on
the screen. Values on the screen stop
changing.
This button replaces the previous
one if it has been activated. Tap it to
resume collecting trip data.
Resets all counters of the currently
shown trip. Collecting trip data is
restarted only when Clarion Mobile
Map receives a position from the
GPS.
6.1.8 Quick menu
The Quick menu is a selection of controls that are
frequently needed during navigation. It can be
opened directly from the Map screen by tapping
.
If you tap any of the switches in the Quick menu
except for the Vehicle type, the Map screen
immediately returns. A switch is on if its lamp is lit.
The Vehicle type button is different. It is a multi-
value button. It opens a list of available choices,
and the symbol of the selected vehicle is shown on
the button.
NP401 OM_100920_EN.indd 55 2011-1-6 16:11:00