Clarion NP401 - Manual (Page 23)

E
ng
lis
h
O
w
ne
r’s
M
an
ua
l
NP401 23
Fine-tuning Smart Zoom
Tap the map to let the map control buttons appear,
and then tap and hold
to open the Smart Zoom
Settings window. Modify the zoom limits of Smart
Zoom if necessary.
4.4.2 Position markers
4.4.2.1 Current GPS position and Lock-on-Road
When your GPS position is available, Clarion Mobile
Map marks your current position with the
icon
on the map.
The
icon may not show your exact GPS
position and heading. If roads are near, it is aligned
to the nearest road to suppress GPS position
errors, and the direction of the icon is aligned to the
direction of the road.
To use the current GPS position, tap
. The
Position menu appears and you can save the GPS
position as one of the following:
• a Favorite
• a Road Safety Camera
• a POI
• a map marker Pin
4.4.2.2 Returning to normal navigation
When GPS position is available, and you have
moved the map (the
icon is moving or is not
even visible), or you have rotated the map in 3D
mode, the
button appears. Tap it to move the
map back to the GPS position and re-enable Track-
up map orientation (automatic map rotation).
Note!
Even if you move the map while you are driving,
Clarion Mobile Map continues navigating
if there is an active route: it plays the voice
instructions and displays the turn preview icons
according to your current GPS position.
4.4.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap
the map, the Cursor appears at the selected point
on the map. Clarion Mobile Map displays the Cursor
with a radiating red dot (
) to make it visible at all
zoom levels, even when it is in the background of a
3D map view.
When the Cursor is set, tap . The Cursor menu
appears and you can use the Cursor as one of the
following:
• the start point of a route
• a via point in a route
• the destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
• a Favorite
• a Road Safety Camera
• a POI
• a map marker Pin
4.4.2.4 Original position in the Cursor menu
When the Cursor menu is open, a special icon
(
) shows the Cursor position the menu was
opened with.
You can move and zoom the map, and you can set
the Cursor to a different place. The usual Cursor
(
) appears, and the buttons of the Cursor menu
initiate actions for this new location.
To return to the original Cursor position, tap .
The map jumps back to the position with which
the Cursor menu was opened, and the
icon
appears again.
NP401 OM_100920_EN.indd 23 2011-1-6 16:10:54