Clarion NP401 - Manual (Page 52)

E
ng
lis
h
O
w
ne
r’s
M
an
ua
l
52 NP401
6.1.6 Route Information screen
The Route Information screen has all the data and
some of the functions you need while you navigate.
There are two ways to open this screen:
• It can be opened directly from the Map screen by
tapping the Turn Preview field ( ).
• In Advanced mode, from the Navigation menu tap
the following buttons: , .
In the top section of the screen you see information
about the current route. The fields on this screen
are continuously updated while you keep the screen
open.
When you open the screen, all fields contain
information about reaching your final destination.
Tap any of the fields to see data on the via
points starting from the first one through the final
destination again.
You have the following data and functions on this
screen:
Name Description Function
Route line
The upper part of this screen shows your planned route as a
horizontal line. Its leftmost point is the start of the route, the
rightmost one is the final destination, and you can see your
via point flags along the line, spaced in proportion to their
distance.
Tap this field to change the
content of all data fields to via
point information.
Estimated
Arrival
Shows the estimated arrival time at the final destination of
the route based on information available for the remaining
segments of the route. The calculation cannot take into
account traffic jams and other possible delays.
Tap this field to change the
content of all data fields to via
point information.
Distance
Left Shows the distance you need to travel on the route before
reaching your final destination.
Tap this field to change the
content of all data fields to via
point information.
Time Left
Shows the time needed to reach the final destination of
the route based on information available for the remaining
segments of the route. The calculation cannot take into
account traffic jams and other possible delays.
Tap this field to change the
content of all data fields to via
point information.
Method
This field shows how the route was calculated. It either
displays the Route Calculation Method or the Vehicle field
from the Route Planning options. Tap this field to change the
content of all data fields to via
point information.
NP401 OM_100920_EN.indd 52 2011-1-6 16:10:59