Clarion NP401 - Manual (Page 19)

E
ng
lis
h
O
w
ne
r’s
M
an
ua
l
NP401 19
The following area appears next to the above described rounded area. When tapping this area, the result
depends on the information currently shown.
Icon Information Details Action
There is no valid
GPS position If there is no valid GPS position,
this symbol appears here.
Tap this area to open the GPS
Data screen to check the signal
status or the connection settings.
Traffic restriction
When GPS position is available but
there is no route to be navigated,
the traffic restriction of the
upcoming intersection is shown
here if there is any.
Nothing happens if you tap this
area of the screen.
,
Second route event
(maneuver after the
next maneuver)
When GPS position and an active
route are both available, this field
shows the route event that follows
the next route event shown in the
above described area.
Tap this area to open the Itinerary
screen with the turn by turn
guidance instructions.
Approaching
a Road Safety
Camera
This icon appears when you
are approaching a Road Safety
Camera, and the warning for
cameras is enabled in Settings.
Tap this area to suppress the
audible camera warning.
Tap again to display the second
route event with the possibility to
open the Itinerary.
Stops the running
simulation
This icon appears during Route Fly
Over, Route Simulation, and Track
Log playback.
Tap this area to stop the
simulation.
Route recalculation
progress
During route recalculation, this field
shows the recalculation progress
between 0% and 100%.
Nothing happens if you tap this
area of the screen.
Indicator strip
- sounds muted/enabled
- Track Log recording
- Bluetooth status
Tap this area to open the Itinerary
screen with the turn by turn
guidance instructions.
NP401 OM_100920_EN.indd 19 2011-1-6 16:10:53