Dymo LetraTag QX50 - Manual (Page 12)

No display
Check the machine is on
Check batteries and replace if necessary
No response to keys
Remove the batteries for a few minutes then
refit. The machine will now reset.
No printing or poor text
Check batteries and replace if necessary
Check tape cassette is installed correctly and
not empty. Clean print head (see “Cleaning).
Print contrast
For use under extreme temperature or
humidity conditions.
Press +
+
The display will show the five contrast
symbols
Use Q or R to select lighter or darker then
press
to set
Jammed tape
Lift out the cassette and carefully release
jammed tape. Cut off excess tape and
refit/replace the cassette.
No success?
Call the customer service telephone - see
warranty booklet
Cleaning
Check and clean the print head regularly to
ensure optimum print quality, using the
cleaning tool supplied (see Fig D).
DYMO label cassettes for
the QX50
Label cassettes
Type: Paper Plastic Metallic Iron-on
Length: 4m 4m 4m 2m
White 91200 ------- ------- -------
Pearl White ------- 91201 ------- -------
HyperYellow ------- 91202 ------- -------
Cosmic Red ------- 91203 ------- -------
Acid Green ------- 91204 ------- -------
Ultra Blue ------- 91205 ------- -------
Silver ------- ------- 91208 -------
Green ------- ------- 91209 -------
Clear ------- 12267 ------- -------
Iron-on ------- ------- ------- 18767
Assorted Pack 91240:
1 x paper white
1 x plastic yellow
1 x metallic silver
PRINT SPACE
12
LTQX50 WEU.qxd 12-09-2002 11:07 Pagina 12