Monarch Instrument Navigator - Manual (Page 15)

Navigator Software User‟s Manual
Page 15 of 20
Note: The Alarms will only be visible in the event that a trace actually entered an alarm condition in which
case that part of the trace in alarm will be indicated by the choices made in the setup. In the example
above, Alarm 1 will be indicated by a solid red line 3 pixels thick.
If you apply the Trace and Alarm settings as shown in the Channel Setup Dialog above, the trace will look
like that shown below. Note that the vertical scale is always in the same color as the trace.
Any data in the trace above the red line is in alarm.
Note: Double-clicking on any point on the trend will take you to the corresponding entry in the DataTable.
3.5.4
SEARCH
By using the search icon (shown left) the user can jump directly to time/date related information in
the DataTable or on the Graph.
Enter the Date or Time required (select the Channel
on the Graph) and click OK. The data will be
rearranged and the point on the graph or in the
DataTable will be highlighted. If no data can be
found (out of the range selected) an error message
to this effect will be displayed.
Go to Contents