Monarch Instrument Navigator - Manual (Page 6)

Navigator Software User‟s Manual
Page 6 of 20
NOTE: If you wish to load the USB Drivers after Navigator Software has been installed, there is a program called
DC1250USBInstallApp.exe under the installation directory to do so. Run this executable to open the
USB Installation application.
Select “From A Specified Location” and then click the browse (…) button to select the USB driver setup
file.
Follow step 10 or 11 depending on which USB driver is being loaded.
3 USING NAVIGATOR SOFTWARE
3.1 STARTING THE PROGRAM
The Navigator Software has the following main features:
It can display information from existing data files in summarized, tabular and graphic formats.
It is capable of monitoring an external device and collecting real-time data (this requires the USB or
Ethernet option on the recorder(s).
It can export the collected data to Excel™.
To start the program, click the desktop icon if installed (shown left), or use the Window‟s Start menu.
This will launch the main dialog as shown below.
Go to Contents