Monarch Instrument Navigator - Manual (Page 17)

Navigator Software User‟s Manual
Page 17 of 20
This folder will travel with the trend and can be reviewed at any time by double-clicking the folder icon.
This information is also saved to the file if the file is currently recording to the PC.
3.6 WORKING WITH REMOTE RECORDERS
The remote recorder can be controlled from the Device Menu. As
shown at right, the user can set the clock, get the card status
(CompactFlash™ card in the remote recorder), control the record
functions, change the recorder configuration, manipulate files and reset
the device. Note that a number of these functions cannot be executed
if the remote recorder is in record mode or the real time graph is active.
You will receive warning messages.
3.6.1
SET CLOCK
Selecting this option will bring up the Set Clock
window which will default to the current time and
date of your PC. The user can change this as
needed. Click the OK button to set the time and
date on the remote recorder to this time. You
cannot change time while the remote recorder is in
record mode
– the option will be grayed out.
3.6.2
CARD STATUS
Clicking this option will display the status of the
CompactFlash™ card in the remote recorder. This
will bring up the status window shown below.
3.6.3 RECORD FUNCTIONS
This option allows the user to stop or start recording in the remote recorder or set the triggered record
mode on.
Go to Contents