Great Plains ADC1150 Operator Manual - Manual (Page 78)

76
Section 7 Options
Model 1150 1995 - 1997 167-058M 7/28/10
Great Plains Mfg., Inc.
Section 7
Options
Loading/Unloading Auger
The 6” Loading Auger is an accessory which can be or-
dered to install on the 1150 Air Drills.
The Auger will either load or unload the bin. It is hydrauli-
cally driven by diverting flow from the implement fold cir-
cuit to a hydraulic motor.
For additional information refer to:
•
“Important Safety Information” section on page 1
•
Section 3 “Operating Instructions” section on page 37
•
Section 6 “Maintenance and Lubrication” on page 69
•
Section 8 “Specifications and Capacities” on page 81
Great Plains part numbers for Auger kits:
•
166-083A Field installed Loading Auger
•
166-082A Factory installed Loading Auger
14722