Canon LV-X2 - Manual (Page 16)

16
READY
LAMP
REPLACE
LAMP WARNING
TEMP.
INPUT
POWER
SET
KEY
STONE
MENU
VOL VOL
– +
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close
MENU operation. (P17,
18)
MENU BUTTON
READY INDICATOR
SET BUTTON
POWER ON–OFF BUTTON
INPUT BUTTON
WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS
LAMP REPLACE INDICATOR
Lights green when the
projector is ready to be
turned on. And it
flashes green in Power
Management mode.
(P36)
Becomes dim when the
projector is turned on.
And bright when the
projector is in stand-by
mode.
Turns to yellow when
the life of the projection
lamp draws to an end.
(P37)
Flashes red when
internal projector
temperature is too
high. (P39)
Used to select input
source. (P22, 30)
Used to select an item or adjust
value in ON-SCREEN MENU. They
are also used to the image in
DIGITAL ZOOM
+/– mode. (P29)
POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
Used to execute the
item selected. It is also
used to expand /
compress the image in
DIGITAL ZOOM mode.
(P29)
Used to turn the projector
on or off. (P19)
KEYSTONE BUTTON
Used to correct
keystone distortion.
(P20, 35)