Canon LV-X2 - Manual (Page 20)

20
Press the FREEZE button on the Remote Control Unit to freeze the
picture on-screen. To cancel the FREEZE function, press the
FREEZE button again or press any other button.
PICTURE FREEZE FUNCTION
KEYSTONE ADJUSTMENT
1 Press KEYSTONE ▲/▼ button on Remote Control Unit or
KEYSTONE button on Top Control or select Keystone on
SETTING menu. (Refer to page 35.) Keystone dialog box
appears.
2 Correct keystone distortion by pressing KEYSTONE ▲/▼ button
or POINT UP/DOWN button(s). Press KEYSTONE
▲ button or
POINT UP button to reduce the upper part of image, and press
KEYSTONE
▼ button or POINT DOWN button to reduce the
lower part.
Reduce the upper width with KEYSTONE ▲ button
or POINT UP button.
Reduce the lower width with KEYSTONE ▼ button
or POINT DOWN button.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
BASIC OPERATION
ADJUSTING THE SCREEN
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
Rotate the FOCUS RING to adjust the projected picture focus.
ZOOM LEVER
FOCUS RING
Move ZOOM LEVER upward to make the image larger. Move ZOOM
LEVER downward to make the image smaller.
WIDE
TELE
• Arrows are white in no correction.
• Arrow of direction being corrected turns blue.
• Arrow disappears at the maximum correction.