Canon LV-X2 - Manual (Page 21)

21
BASIC OPERATION
Press the NO SHOW button on the Remote Control Unit to black out
the image. To restore to normal, press the NO SHOW button again or
press any other button.
NO SHOW FUNCTION
Message disappears after 4 seconds.
No show
Press the P-TIMER button on the Remote Control Unit. The timer
display “00 : 00” appears on the screen and the timer starts to count
time (00 : 00 ~ 59 : 59).
To stop the P-TIMER display, press the P-TIMER button. Press the P-
TIMER button again to cancel the P-TIMER function.
P-TIMER FUNCTION
Indicates roughly
level of volume.
Close SOUND Menu.
Indicates roughly level of
volume.
Press MUTE button to set
Mute function On or Off.
The display disappears after 4 seconds.
SOUND MENU
SOUND Menu icon
1
2
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to move the red
frame to SOUND Menu icon.
Volume
Press the VOLUME (+/–) button(s) on the Remote Control Unit or
POINT LEFT / RIGHT (VOL –/+) button on Top Control to adjust
volume. The volume dialog box appears on the screen for a few
seconds.
Use the VOLUME (+) or POINT RIGHT (VOL +) button to increase
volume, and VOLUME (–) or POINT LEFT (VOL –) button for
decreasing.
Mute
Press MUTE button on Remote Control Unit to cut off the sound. To
restore sound to its previous level, press MUTE button again or press
Volume (+/–) or POINT LEFT / RIGHT (VOL –/+) button(s).
To increase the volume, press the POINT RIGHT (VOL +) button, and
press the POINT LEFT (VOL –) button for decreasing.
Press the POINT LEFT/RIGHT button(s) (VOL –/+) to cut off sound.
The dialog box display is changed to “On” and sound is cut off. To
restore sound to its previous level, press the POINT LEFT/RIGHT
(VOL –/+) button(s) again.
Press the POINT DOWN button to move the red frame to the
item that you want to select, and then press SET button.
SOUND ADJUSTMENT
DIRECT OPERATION
MENU OPERATION
Volume
Mute